Technics SL-1200MK6-K DJ Turntable Direct Drive Black LP Japan New Rare Music

Description

Condition : New
Limited to 2! [New and unopened items!] 【 Technics SL -1200 MK6K 】 Quartz Synthesizer D.D. Player
★Technics SL -1200 MK5G blue LED and tone arm for a luxurious look.
★Improved sound quality through additional resonance measures
★Improvement of pitch fader accuracy
★In the Technics SL -1200 series from the 1970s to 2010, past shortcomings were improved as much as possible.
The most stable product ever!
★This is a brand-new Technics brand last valuable model!
■While keeping on the finished form and functionality, the evolution brings a higher level of sound.
■S-shaped tone arm using high quality sound material OFC (oxygen free copper wire)
■Three-Layered cabinet with further vibration damping
[Product Features]
■While keeping on the finished form and functionality, the evolution brings a higher level of sound.
★S-shaped tone arm using high quality sound material OFC (oxygen free copper wire)
A high-precision bearing and a pipod are installed at the arm base and the arm contact point. In addition to a high-sensitivity gimbal suspension system that aligns the center of the arm's lateral movement (horizontal rotation axis) and vertical movement (vertical rotation axis) and controls the arm balance at the center of the tone arm rotation, the S-shaped tone arm is mounted to enable sound reproduction with excellent trace performance. In addition, OFC (oxygen free copper wire) is used for the signal wire of the tone arm to reduce signal distortion and transmission loss.
★Three-Layered cabinet with further vibration damping
The 1200 MK6 features a highly rigid aluminum die-cast cabinet with a panel at the top, Technics Non Resonance Compound in the middle, and a 3-layer cabinet with special heavyweight rubber at the bottom for superior vibration damping. The seamless integral molding realizes excellent robustness and durability in the upper cabinet, and high vibration isolation in the lower special weight class rubber, as well as the durability and use resistance of the rubber. In addition, it is placed in the middle of the turntable so that it wraps around the turntable, and combined with T.N.R.C. which makes it difficult to transmit the vibration caused by external sound to the machine, it enables stable sound quality and DJ play at all times.
★quartz synthesizer with continuous pitch control
Equipped with the traditional popular vertical fader pitch control. Fine pitch adjustment is possible by eliminating the center click set at ± 0% point and equipping it with a reset button that can set the rotational speed to ± 0%. In addition, the 1200 MK6 has a control circuit that reduces the variation between the scale and the actual pitch, improving pitch accuracy and enabling more accurate scratch play.
★Uses bright and long-life blue LED needle illuminator
High brightness and long life are realized by adopting LED (light emitting diode) for needle tip illuminator. The beautiful blue LED enhances visibility and illuminating effect.
★High performance and high reliability of SL -1200, which is supported by the world
■Adoption of original turntable integrated structure high torque D.D motor
The structure integrates the turntable, stator (stator) and rotor (rotor), eliminating transmission loss and improving the rotation accuracy of the turntable. With a high torque of 1.5 kg ・ cm, which reaches constant speed rotation in only 0.7 seconds (at 33 1/3 r/min), it is possible to start up smoothly and start off with good timing.
■Insulator of special rubber molding excellent in Vibration-Proofing property
Excellent vibration isolation is achieved by the internal vibration isolation spring and special rubber-molded felt on the bottom. You can also adjust the height and tilt of the turntable itself.
■Stop brake adjustable according to preference
■Needle pressure adjustment to support DJ play
■Power switch for preventing malfunction
■Shell stand on top of cabinet
[Turntable Section]
●format quartz direct drive turntable system (manual)●Driving system direct drive●Drive Motor Brushless DC Motor●Turntable made of die-cast aluminum, 33.2 cm in diameter and 1.7 kg in mass (including rubber sheet)●Speed 33 1/3, 45 r/min●Speed adjustment range ± 8%●Starting torque 1.5 kg/cm●Starting Characteristic 0.7 s (at 33 1/3 r/min)●Brake mechanism electronic brake●Speed deviation within ± 0.002% (at reset on)●Wow & Flutter 0.01% W.R.M.S * 1, 0.025% W.R.M.S (JIS C 5521)± 0.035% peak (IEC 98 A weighted)●SN ratio (rumble) 78 db (IEC 98 A weighted), 56 db (IEC 98 A unweighted)
■External Dimensions Width 453 x Height 172 x Depth 353 mm■Weight: approx. 11.7 kg
[Tone arm]
■Type Universal S-shaped tone arm Gimbal suspension bearing structure static balance type■Arm Effective Length 230 mm■Overhang 15 mm■Tracking error angle 30 cm record circumference: + 2 ° 32 '/ 30 cm record circumference: + 0 ° 32'
●Offset Angle 22 °●Rotational axis sensitivity Horizontal, vertical and initial motion sensitivity: 7 mg or less●Arm Effective Mass 12 g (without Cartridge)●Arm Height Adjustment Range 6 mm●Needle Pressure Adjustment Range Direct Reading Type: 0 ~ 4 g/Shell Mass: Approx. 7.5 g●Applicable Cartridge Mass/Cartridge Unit: 3.5 ~ 13 g/When Using Shell Weight: 3.5 ~ 6.5 g/When Not Using Auxiliary Weight: 6.0 ~ 10 g/When Using Auxiliary Weight: 9.5 ~ 13 g
■Cartridge Mounting Dimensions JIS Standard 12.7 mm (1/2 Inch) Mounting Spacing■Shell Terminal Lug 1.2 mm φ4 Pin Terminal Lug■Power 100 VAC, 50/60 Hz■Power consumption 11 W
*1) Indicates the D.D. motor speed variation excluding the effects of records, cartridges, tone arms, etc.This value is measured using the motor's built-in F-G signal.
==For customers who purchase home appliances==
If the corresponding voltage of the product is 100V, a transformer may be required depending on the country of residence (100-240V can be used as it is).
Also, since the plug is A type, a conversion plug is required.
Please read the explanation for details.
If there is an English version of the manual on the manufacturer's homepage, we will send you the download link of the English manual by e-mail after shipping the product.
Please message me if you have any questions.
Payment
You can make any payment according to ebay.
Shipping
Usually, we will ship within 10
days after payment is confirmed.
Shipping costs vary depending on your country of residence.
There is an additional charge for shipping to areas designated by the shipping company as remote locations.
When shipping the item, we take great care not to damage the item and pack it.
If it is a fragile item, put it more strictly, and if it is a card, put it in a special card case.
Return Policy
Customer service and satisfaction are very important to us.
I have an return policy if notified within 30 of the receipt of the item.
All returned items must be the original condition.
All return requests must be made within 30 days of the receipt of the item.
Our return policy, In the only case of unopened item package.
Please contact me first for return before you ship it back to me.
The postage of the returned goods is a buyer burden.
About Us
Hello, We are Zetton37.
We would like to sell wonderful products in Japan.
Figures, animation,
Daily necessities
and so on.
Please do not hesitate to contact us.
-----------------

Koto-ku, Tokyo, Japan
-----------------
International Buyers - Please Note:
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying.
These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.
We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.