TECHNICS SL-1200GR-S Direct Drive Turntable System Grand Class LP DJ 100V JP NEW

Description

TECHNICS SL-1200GR-S Direct Drive Turntable System Grand Class LP DJ 100V JP NEW
Description
A newly developed coreless direct drive motor that achieves stable rotation.
Two-layer platter in pursuit of rigidity and vibration damping characteristics
In order to solve the problem of rotation unevenness called "cogging", which was a problem of direct drive type turntables, we have newly developed a single rotor type coreless direct drive motor that uses a coreless stator that eliminates the core from the coil. ..
Furthermore, by applying the latest control technology cultivated in Blu-ray Disc equipment, stable rotation has been achieved by outputting an accurate sine wave with a microcomputer for constant speed control. The rotor yoke and rotor magnets that make up the motor are fixed to the platter with a two-layer structure. A structure in which the motor and platter are firmly connected is adopted to realize more stable rotation.
The electric circuit is also tuned to maximize the performance of the newly developed motor and platter.
As a result, we have achieved a rotation accuracy that exceeds the SL-1200MK6 *. The rise time is the same 0.7 seconds (at 33 1/3 rotation).
Enhanced high rigidity and vibration resistance. Tough housing structure that supports beautiful sound
The SL-1200GR uses a two-layer structure that firmly integrates the BMC (bulk molding compound) and aluminum die-cast chassis to ensure high rigidity.
In addition to rigidity and vibration resistance, the aluminum die-cast chassis on the surface has a matte coating with a calm texture to enhance the texture.
The insulator that supports the housing and reduces vibration from the outside uses a special silicone rubber that has both high damping characteristics and long-term reliability. It was completed by tuning it exclusively according to the weight of the main body.
In addition, the platter with a two-layer structure in which aluminum die-casting and deadening rubber that eliminates unnecessary resonance are bonded to the entire back surface has an inertial mass of approximately 2.5 kg (including rubber sheet), which is 0.8 kg higher than SL-1200MK6 *. Increased. Furthermore, by pursuing lower vibration and repeating precise simulations, the shape of the aluminum die-cast part is optimized and reinforced ribs are added to increase the rigidity.
As a result, vibration damping characteristics that are more than double that of SL-1200MK6 * have been achieved.
Tone arm pursuing excellent initial sensitivity and tracing performance
The tone arm, which is important for reading the music information engraved on the record with high accuracy, inherits the static balance type of Technics tradition.
A lightweight and highly rigid aluminum pipe is used for the tone arm pipe. High-precision bearings using a machined housing are used for the tone arm bearings of the gimbal suspension structure.
As a result, a high initial sensitivity of 7 mg to 5 mg or less for SL-1200MK6 * has been achieved. Allows accurate tracing of vinyl records. Also, in addition to the standard weight, an auxiliary weight is included. The applicable cartridge mass when using the auxiliary weight is 18.7 to 25.1 g (including the attached head shell), and it can be installed with a wide range of cartridges.
In addition, a detachable AC input terminal and a gold-plated PHONO terminal have been adopted to enable high-purity signal transmission.
【Main Specifications】
Rotation speed: 33 1/3, 45, 78 r / min
Rotation speed adjustment range: 8% for scholarship, 16% for soil
Wow and flutter: 0.025% W.R.MS (JIS C5521)
Signal-to-noise ratio: 78dB (IEC 98A weighted)
Tone arm type: Universal S-shaped tone arm static balance type
Overhang: 15 mm
Applicable force Tridge mass: 187 g to 25.1 g (1 type of attached weight including head shell)
Output terminal: PHON0 terminal x 1, PHON0 ground terminal x 1
Power supply: AC I0OV, 50 / 60HZ
Power consumption: 11VV / 0.2 W when power is off
External dimensions (width x height x depth): 453 x 173 x 372 mm
Mass: about 11.5k now
Accessories: Turntable sheet x 1, Dust cover x 1, EP record adapter x 1, Auxiliary weight x 1, Shell x 1, Overhang gauge x 1, PHON0 cable x 1, PHON0 ground wire x 1, Power cord x 1
*Japanese specification voltage 100V
*Please note that it may take some time to ship.
Shipping Duration
All items are official items.
We will ship your item via FedEx or DHL International Japan Post with the tracking number.
We can NOT ship your item on Saturdays, Sundays, and Japanese Holidays.
We can NOT ship your item if you did not register your phone number to eBay.
---Shipping Duration---
Expedited ......3days~1week
It may takes 2week~3weeks depending on the shipping status of each country.
International Buyers - Please Note:
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.
We NEVER mark merchandise values below value or mark items as "gifts."
US and International government regulations prohibit such behavior.
Thank you for your understanding.