Pioneer XDJ-RX: Pick Replacement Mixer Circuit Board, Screen Assembly, Jog Dials

Description

These circuit boards and assemblies are all removed from an XDJ-RX which had the power supply board die. Since I also have a CDJ-900 Nexus setup I use instead these days, I decided rather than fix the XDJ-RX, I'd offer up the parts to help keep other systems out there running.
All of these boards are clean for the most part; they're from a used system, not fresh out of the factory, but have plenty of life left. They include everything you see in the photos of it on the red and blue background, so if there are any screws, ribbon cables, plastic guards, brackets etc. shown with it, you will get those too, and they will be assembled as shown, so they are pretty much plug'n'play right into your existing system. You may have to remove a few things if a cable run or bracket block access but it's not too hard to get these in for the most part.
Please be careful opening your XDJ-RX and check youtube or google first. There are a few delicate cables that don't have a lot of extra length, you must take care to not pull on them when separating the top and bottom halves.
The Jog Dials are complete and go in and out with only 6 screws and 2 snaps and a ribbon cable once you have the XDJ-RX open. The Jog Dial that is still available has a scratch about 2 centimeters long across the top surface. It does not affect operation at all.
The Mixer Board Assembly has had the faders and Volume LED board removed, but the cables that connect to them are still connected, so you just need to screw yours in and snap the cable in. It has everything else on the board intact, including all of the switches and potentiometers.
The Screen assembly is 100% complete with no parts removed and is plug'n'play. It is one of the easiest things to replace since it has everything. It's got light signs of use but no deep scratches or cracks.
I know there are replacement sites out there that sell just individual plain boards or potentiometers without the full assembly like I have here but then you'd have to desolder all of the extra small components from your own unit, attach each of them to the new board, re-do all the bracket assemblies and take on a whole lot of extra work, and they are way more expensive too... so to make things easier for both of us, I left all of these assemblies intact as shown so you can just unscrew the old one and put in the one you order.
If you need other smaller boards/jack assemblies, jog dials, the entire screen/computer assembly, button shells, knobs, etc., check my other listings, they are grouped together by size:
https://www.ebay.com/sch/m.html?_odkw=&_ssn=kevincleaninghouse&item=254471371236&_osacat=0&_from=R40&_trksid=m570.l1313&_nkw=xdj-rx&_sacat=0
You can check out a parts diagram exploded view here: https://www.instrumentalparts.com/content/pdf/XDJ-RX.pdf
Combined shipping and a discount for multiples is automatically calculated when using the "add to cart" buttons. Using "buy it now" may bypass the automatic discount.