PIONEER PL-6 Original Record Player Turntable Rare Vintage 1960 Hi Fi Good Look

Description

PIONEER PL-6 Original Record Player Turntable Rare Vintage 1960 Hi Fi Good Look
The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
PIONEER PL-6 Original Record Player Turntable RARE Vintage 1960's Hi Fi Good Look
PIONEER PL-6
PIONEER PL-6A
24,000 yen (middle of the 1960s)
Description
�@
The stereo record player which developed and carries an original auto organization with the base for PL-6.
4 pole synchronous motor is adopted as a motor.
For a synchronous type, it was not influenced by transition of a voltage or a load intensity, but the exact constant-speed rotation is realized.
The turntable made from aluminum alloy die-casting with a weight of 1kg is adopted as a turntable for 25cm in diameter which gave precise machining. .
even a lever operation comes out and the auto organization which rise and fall of a tone arm, on/off of a motor power source, an operation of an idler, etc. interlock and commit is carried.
The oil dumping arm elevation organization is carried and it goes up and down a tone arm by the suspension action in a spring and an oil cylinder.
A motor power switch is interlocked with an arm elevation organization, and operates. Only when a tone arm descends and it is in a performance state, it is set to being turned on, and it is come by off when an arm goes up. Moreover, an operation of an idler is also interlocked with.
Only while a tone arm descends and the motor is rotating by the idler auto controller, a motor shaft (capstan) and turntable inner circumference are pasted.
In addition, if an elevation lever is placed according to the location of Play, it is possible to carry out an on/off operation of a motor with a velocity change thumb as well as a common player.
The pipe type tone arm of the absent-resonance design type which carried out the original work with a manipulation of the pivot is adopted as a tone arm. Form serves as a static balance type suitable for stereophonic reproduction.
Moreover, the connector type head is adopted and a using of other cartridges is possible.
PL-C6 which is man-month type cartridge is adopted as the cartridge.
The full-scale structure which planted a 0.7mil diamond needle in the cantilever made from a duralumin pipe of 0.6mmphi is adopted, the needle point is considering it as the scheme which attached the whole needle to the holder of a plastics, and a tension favorable impression is simply possible for it.
FormRecord player
Auto organization An oil dumping arm elevation organization is interlocked with.
Engine power-source auto switchpoint
idler auto controller
Tone armStatic balance type tone arm
Motor4 pole synchronous type
Turntable Diameter aluminum alloy die-casting of 25cm, 1kg
Rotation unevenness0.2 or less
Rotational frequency33 1/3, 45 or 78rpm
Cartridgeman-month type (PL-C6)
SN ratio (at the time of PL-C1 using)47dB or more
Starting time from a start-upLess than (33rpm) 1/4 rotation
Cartridgeman-month type (PL-C1)
Frequency characteristic20Hz-21kHz�}2dB
Channel isolation20dB or more (1kHz)
Output voltage5mV (at the time of 1kHz and 50mm/s)
Output balance2dB or less (at the time of 1kHz and 50mm/s)
Impedance1. 5kohms (1kHz)
Direct current resistance500ohm
Load resistance50kohm
Needle0.7mil diamond needle
Needle point compliance6x10 to 6 cm/dyne
Tracking error�}1.5 degrees
Proper stylus force3g-4g
Switching needleDiamond needle for stereos PL-N6 (2,400yen)
Sapphire needle for SP monophonic recordings PL-N 6S (1,000yen)
Power sourceAC220V, 50Hz/60Hz switching type
DimensionsWidth 475x height 190x depth of 380mm
https://audio-database.com/PIONEER-EXCLUSIVE/player/pl-6a-e.html
ATTENTION:
With small marks of use and the passage of time, Look carefully at the photos that show the real state of the article, We do not accept subsequent claims.
A motor power switch is interlocked with an arm elevation organization, and operates. Only when a tone arm descends and it is in a performance state, it is set to being turned on, and it is come by off when an arm goes up. Moreover, an operation of an idler is also interlocked with. The pipe type tone arm of the absent-resonance design type which carried out the original work with a manipulation of the pivot is adopted as a tone arm. Form serves as a static balance type suitable for stereophonic reproduction. The full-scale structure which planted a 0.7mil diamond needle in the cantilever made from a duralumin pipe of 0.6mmphi is adopted, the needle point is considering it as the scheme which attached the whole needle to the holder of a plastics, and a tension favorable impression is sim
Velocidades
33,3RPM
Velocidades
45RPM
Velocidades
78RPM
Rango de pitch
+/- 6 %
Tipo de tracción
Polea
EAN
No aplicable
Marca
Pioneer
Tipo de unidad
Unidad
País/Región de fabricación
Japón
Garantía del fabricante
Sin garantía
Modelo
PL-6
Control de pitch
No
Salidas de audio
Estéreo RCA
Cantidad de unidades
1