Audio-Technica AT-LP60XHP-GM Fully Automatic Belt-drive Turntable w/Headphones

Description

Enjoy your vinyl with no additional equipment required, the AT-LP60XHP-GM fully automatic belt-drive turntable with headphone combo from Audio-Technica has you covered. Integrated with a 3.5 mm (1/8") headphone jack and volume control on the front panel, this turntable builds upon the AT-LP60XHP model with a headphone amplifier to play 33 and 45 RPM records. Plug in the included ATH-250AV over-ear headphones (or any headphones of your choice) and start the records spinning. Audio-Technica's ATH-250AV headphones are equipped with 40 mm drivers for clear mid- and low-frequency sound reproduction, are lightweight and comfortable, and feature isolating earpads to listen for as long as you like.
AT-LP60XHP-GM also features a detachable RCA output cable (3.5 mm male to dual RCA male) and built-in switchable phono preamp allowing the turntable be traditionally connected to stereo, powered speakers, or other components. A redesigned tonearm base and headshell improve tracking and reduce resonance. An included AC adapter that moves the AC/DC conversion outside of the chassis, limiting its impact on the signal chain and further reducing unwanted noise. The highly-compatible AT-LP60XBT Dual Magnet™ cartridge features an easily replaceable stylus (compatible style: ATN3600L) and is integrated into the headshell for assured performance. Easy upkeep and connectivity for easy listening—experience the high fidelity audio of vinyl from AT-LP60XHP-GM.
Includes
ATH-250AV headphones
Detachable RCA output cable (3.5 mm male to dual RCA male)
45 RPM adapter
Removable hinged dust cover
Features
Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
Integrated headphone amplifier with front-panel 3.5 mm (1/8") headphone jack and volume control
ATH-250AV over-ear headphones with 40 mm drivers, 3.5 m (11.5') cable and 3.5 mm (1/8") stereo mini-plug
Redesigned tonearm base and headshell for improved tracking and reduced resonance
Integral Dual Magnet™ phono cartridge with replaceable diamond stylus (ATN3600L)
AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
Built-in switchable phono pre-amplifier for phono- or line-level output
Specifications
Type: Belt drive turntable, fully automatic
Motor: DC servo-controlled
Speeds: 33-1/3 RPM, 45 RPM
Turntable Platter: Aluminum
Wow and Flutter: Less than 0.25% (WTD) @ 3 kHz (JIS)
Signal-to-Noise Ratio: >50 dB (DIN-B)
Output Level: Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec
Pre-amp “LINE”: 150 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain: 36 dB nominal, RIAA equalized
Power Supply Requirements: 120V AC, 60 Hz, 3W
Dimensions: 14.15" x 3.84" x 14.70"
Replacement Stylus: ATN3600L
Headphones
Type: Closed-back Dynamic
Driver Diameter: 40 mm
Frequency Response: 18 – 22,000 Hz
Maximum Input Power: 500 mW
Sensitivity: 102 dB/mW
Impedance: 43 ohms
Weight: 97 g (3.4 oz)
Cable: 3.5 m (11.5')
Connector: 3.5 mm (⅛") stereo mini-plug